- Home
- Equipment
Refine by
Fox Equipment Environmental Equipment & Supplies
11 equipment items found
Manufactured by:Fox Equipment, LLC based inGreen Cove Springs, FLORIDA (USA)
Wafer/Butterfly dampers are used in round duct applications. The advantages of this damper include the simplicity of design, quick closing capability, versatility and cost efficiency. Primarily used for flow control and low leakage functions, butterfly dampers are specified in systems that handle light particulate or clean gas. Typical applications include: system balancing, Industrial utilities, ...
Manufactured by:Fox Equipment, LLC based inGreen Cove Springs, FLORIDA (USA)
Fabric Expansion Joints are primarily used to relieve the stress caused by constant or enduring system movement. Fox Equipment manufactures a complete array of fabric expansion joints. Our expansion joints can be mounted directly on our dampers, when shipping, to minimize field erection ...
Manufactured by:Fox Equipment, LLC based inGreen Cove Springs, FLORIDA (USA)
Fox Equipment's Engineers have the capabilities to design custom noise reduction solutions. These solutions have been incorporated into Firing Ranges, Testing Rooms, and Engine Enclosures. With the use of passive silencer technology, the Fox Equipment Engineers can reduce noise levels to meet the environmental requirements of your area. ...
Manufactured by:Fox Equipment, LLC based inGreen Cove Springs, FLORIDA (USA)
Low leak slide gates are primarily used for isolation purposes where low levels of leakage and pressure drop are required. Low Leak applications include isolation for systems that function under negative pressure or require a tight shut-off to aid in the systems process. (i.e.shaking the bags in a large bag ...
Manufactured by:Fox Equipment, LLC based inGreen Cove Springs, FLORIDA (USA)
Zero leak slide gates are used when zero-leakage isolation is required. Zero leakage isolation is accomplished by pressurizing the seal air chamber that surrounds the blade edges. When compared to a double louver, the zero leak slide gate requires less seal air and flange to flange space; therefore, it can be used in tight runs of ...
Manufactured by:Fox Equipment, LLC based inGreen Cove Springs, FLORIDA (USA)
Opposed louver dampers are used for process gas control. The louvers function by rotating adjacent blades in opposite directions. (One clockwise, the next blade counterclockwise) Operating the blades in this manner gradually decreases or increases the cross-sectional area between the blades during operation. This gradual change in area allows this louver to have reasonably good air control ...
Manufactured by:Fox Equipment, LLC based inGreen Cove Springs, FLORIDA (USA)
Tandem dampers are designed to perform as a Double Louver Damper except instead of having “seal air” between two sets of louver blades, the “seal air” is between the two skins of the wider tandem blades. The advantage is a more compact design as well as fewer blades, bearings, shafts, ...
Manufactured by:Fox Equipment, LLC based inGreen Cove Springs, FLORIDA (USA)
Radial Vane /VIV /IVC Dampers provide additional flow control for fan inlets. Radial Vanes also provide pre-spin of the air into the fan. Starting the fan while the damper is in the closed position allows for a low horsepower startup. Fox Equipment supplies all radial vane dampers with a cantilevered blade design complete with two external bearings thus eliminating the need for blade support and ...
Manufactured by:Fox Equipment, LLC based inGreen Cove Springs, FLORIDA (USA)
Parallel louver dampers are primarily used for isolation applications. All of the blades rotate in the same direction. With the addition of blade seals, this damper can achieve better than 99% shut off. Parallel blade louvers are also used on inlet boxes of large industrial fans to promote pre-spin to the in rushing air, thus enhancing fan ...
Manufactured by:Fox Equipment, LLC based inGreen Cove Springs, FLORIDA (USA)
Double louver dampers are designed to achieve zero leakage isolation. Double louvers achieve zero leakage isolation by pressurizing the space between the two sets of louver blades with “seal air”. This “seal air” is supplied at a pressure higher than the pressure in the flue duct, creating a positive pressure ...
Manufactured by:Fox Equipment, LLC based inGreen Cove Springs, FLORIDA (USA)
Slide Gate or “Guillotine” Damper are most commonly specified when positive isolation for maintenance is the primary function of the damper and also for severe service conditions. Guillotines are classified in two styles: Low Leak and Zero Leak. Both styles are ideal for a high degree of isolation while providing low pressure drop when the dampers are in the open position. Guillotine ...